Mitel Border Gateway

[mevans1974]

Hi,
I have a question. We are installing Mitel Border Gateway in a MAS server with Nupoint & UC server. We will be deploying smart phone devices. The smart phone are working internal with UCA mobile, however I can't get it to work outside of the network, We have it on the DMZ so there is no port issue there. Do we need licenses in order for the mobile phone to work outside of the network.

I notice the license for TW shows 0

[Navarre]

MAS is not supported on a DMZ.

[mevans1974]

well according to the document if we have the server setup in gatway mode me can put it on the DMZ or we can do port forwarding

[ralph]

If you are NATing your DMZ then you will have one way audio issues.

Ralph

[Navarre]

well according to the document if we have the server setup in gatway mode me can put it on the DMZ or we can do port forwarding

That's news to me. Of the apps in MAS, only MBG knows how to handle a DMZ configuration properly. MAS belongs on the LAN, ideally. Even on the network edge, a bastion host should have a minimal number of services for security reasons. Only MBG needs to be exposed to the Internet. Use two servers and an edge MBG, and cluster them like in the documentation.

[johnp]

Agree with Navarre. That's how I'd install your scenario. MBG is cheap as stand alone or virtual.

[LoopyLou]

If you have the MAS/MBG in gatway mode it needs to be directly connected to the WAN and not to a DMZ. If in the DMZ it should be in server only mode for the easiest implementation. As others suggest best method to use a MAS based MBG clustered to a stand alone MBG in the DMZ.

[s97ai]

could anyone send me the installation and config doc for UCA working with MCD 3300, my reseller is crap, they are not giving me the right info, I dont think they have enough knowledge or skills.