Author Topic: Mitel e2t MAC Address (Read 6258 times)

dh_lab · « **on:** October 30, 2011, 06:06:19 AM »

hi all,
how can check the e2t card mac with command prompt.

thanx

ralph · « **Reply #1 on:** October 30, 2011, 07:46:20 AM »

Some systems have the MACs on a sticker on the back of the controller. Look there first.

I don't have my notes with me but try 'showArp'.

Ralph

dh_lab · « **Reply #2 on:** October 31, 2011, 12:00:47 AM »

"showArp" command not available

brantn · « **Reply #3 on:** October 31, 2011, 12:30:20 AM »

Yes sticker on the controller is the fastest for sure. Can you not get into the controller at all?

bobcheese · « **Reply #4 on:** October 31, 2011, 03:00:59 AM »

Is it not in the 'system hardware compute' form?

ralph · « **Reply #5 on:** October 31, 2011, 07:41:49 AM »

Quote

Is it not in the 'system hardware compute' form?

Thanks, Bobcheese.
Didn't realize that was there.

Ralph

brantn · « **Reply #6 on:** October 31, 2011, 09:38:43 AM »

That is why I was asking if he can't get into the system at all then you don't need vxworks' commands.

dh_lab · « **Reply #7 on:** November 10, 2011, 08:48:39 AM »

Thank you all,
i found MAC with the lease of dhcp

Mitel Forums - The Unofficial Source