Author Topic: Use of feature access keys without pressing Cancel key or hanging up  (Read 1809 times)

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
I defined a keys on 5324  to switch the day mode to Day and Night 1 mode.

I set "Dialed Day/Night Service - Activate" feature access code to **5 and the keys defined as CDE Speedcall to **50 for the Day Mode key and CDE Speedcall **51 for the Night 1 key.

The both keys work fine, but require pressing Cancel key or hang up. I wonder if there is any way to avoid pressing the Cancel key?

From the system help, there is step 4) to hang up:
To change the mode of service on a local node:

1) Lift the handset.

2) Dial the Dialed Day/Night Service - Activate feature access code.

3) Do one of the following:

Press 0 for Day service.

Press 1 for Night 1 service.

Press 2 for Night 2 service.

4) Hang up.



Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
No.  Not with feature codes.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10