Mitel Forums > Mitel MiVoice Business/MCD/3300

Help 9.0.0.41 to 8.0.11.14 stuck on DB restore

(1/2) > >>

swilson:
I have a new Mxe that I tried to downgrade from 9 to 8 and it is stuck on the db restore.  From VX is says that the restore is not compatible do you want to continue yes or no.  It doesn't do anything no matter what I type.  I have never tried to down grade a system before so any advice would be great.  I have another Mxe coming in Monday that I have to do the same thing to and I would like to not repeat this on that one as well. 

Stacey

ralph:
Looks like you'll have to do a manual software load without using the installer tool.

Ralph

v2win:
There is no way to downgrade a database once the database has been upgraded.

Do you have an older backup from when the system was release 8?

Why do you want to go back to release 8?

Mattmayn:
If you used the SI tool to go from 8.0 to 9.0 (with no other upgrades between) you may run the "swap" maintenance command. Check in the about System Administration to see if the rel you want in listed under the inactive software version.

You WILL LOSE any programming changes that were made since the last upgrade.

ralph:
Stacey,
Did you finally get it going?

Ralph

Navigation

[0] Message Index

[#] Next page