Author Topic: CSM V5 to V6 database conversion issue  (Read 2934 times)

Offline dfleschute

  • Jr. Member
  • **
  • Posts: 47
  • Karma: +0/-0
  • What now?
    • View Profile
CSM V5 to V6 database conversion issue
« on: June 06, 2013, 08:42:50 AM »
When I use the setup wizard to convert the database, I receive an error that the database is either not running, or the username/password is incorrect.  The database is certainly running, and no username/password is requested/required when converting from a V5 database.


Offline dfleschute

  • Jr. Member
  • **
  • Posts: 47
  • Karma: +0/-0
  • What now?
    • View Profile
Re: CSM V5 to V6 database conversion issue
« Reply #1 on: June 26, 2013, 03:13:18 PM »
Mitel remoted into the server, and the conversion worked perfectly.  The tech claims it didn't work because I was using Remote Desktop Connection (RDP) to run the process.

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: CSM V5 to V6 database conversion issue
« Reply #2 on: July 03, 2013, 06:47:13 PM »
Wow someone else that actually uses CSM!

Are there actually many other CSM installs out there?

Offline dfleschute

  • Jr. Member
  • **
  • Posts: 47
  • Karma: +0/-0
  • What now?
    • View Profile
Re: CSM V5 to V6 database conversion issue
« Reply #3 on: July 08, 2013, 01:15:36 PM »
If I ask for changes, I'm told the "thousands" of other users have not made similar requests.  I would find it odd that there would be thousands of other users, yet so few on these boards.

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: CSM V5 to V6 database conversion issue
« Reply #4 on: July 08, 2013, 06:24:27 PM »
Well from what I understand you can count the number of them that are in this country on one hand!

Online sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: CSM V5 to V6 database conversion issue
« Reply #5 on: July 08, 2013, 08:08:06 PM »
Well from what I understand you can count the number of them that are in this country on one hand!
I'm sure the only CSM's in Australia would be those in Demo Kits. I don't believe it ever took off or is even available here even though it is in SWB.

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: CSM V5 to V6 database conversion issue
« Reply #6 on: July 15, 2013, 07:54:19 AM »
The CSM software was more often seen if a 5000 was involved. In our area Prairie Fyre or some other option was used with a MCD.


 

Sitemap 1 2 3 4 5 6 7 8 9 10