Author Topic: Ringback tone calling from E1  (Read 2387 times)

Offline gimitel

  • Sr. Member
  • ****
  • Posts: 205
  • Karma: +0/-0
    • View Profile
Ringback tone calling from E1
« on: July 04, 2013, 04:02:12 PM »
Hello Mitel friends. I have a problem that when I dial a specific international number I am not getting the ring back tone. When I placed the call you will hear no tone until the other partie pickup the phone. Does anyone know what the problem might be.

Best Regards

Gimitel


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Ringback tone calling from E1
« Reply #1 on: July 04, 2013, 07:43:03 PM »
Likely a misconfigured sip trunk on the far end IMHO.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Ringback tone calling from E1
« Reply #2 on: July 05, 2013, 08:39:14 AM »
This is a shot in the dark but the the trunk circuit descriptor check "Audio inhibit until answer supervision"

Offline LoopyLou

  • Hero Member
  • *****
  • Posts: 556
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Ringback tone calling from E1
« Reply #3 on: July 05, 2013, 12:16:46 PM »
Other then what has been suggested if this occurs on a single international number it is more likely to be at their end then yours.


 

Sitemap 1 2 3 4 5 6 7 8 9 10