Author Topic: Mitel MBG No Audio Problem  (Read 3815 times)

Offline kashwmu

  • New Member
  • *
  • Posts: 1
  • Country: us
  • Karma: +0/-0
    • View Profile
Mitel MBG No Audio Problem
« on: April 22, 2013, 06:18:46 PM »
Hi, I have a new system and I turned up MBG, made the firewall changes, registed and configured a SIP device and everything worked just fine. When I hookup a MiNet phone, 5320e to be exact, I can register the phone without any issues and make a call but there is no audio at all. I checked with the firewall team today and we did a full allow and I was still not able to hear any audio. The MBG is in Server Only mode and has a public IP NAT'd to its internal IP for the firewall traversal. Any ideas?
« Last Edit: April 23, 2013, 07:43:01 AM by ralph »


Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 344
  • Karma: +11/-0
    • View Profile
Re: MBG No Audip
« Reply #1 on: April 22, 2013, 08:14:19 PM »
no audio in both directions or one-way audio?

I assume this is a 3-port f/w DMZ configuration. Is MBG's network profile set to that and is the "setside" and "icpside" streaming addresses set to MBG's public address (the one your f/w is natting for MBG)?

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MBG No Audip
« Reply #2 on: April 22, 2013, 09:43:07 PM »
What do you get if you run the Teleworker Network Analyzer from a remote site? Your issue (no audio/one-way audio) is almost always port related, TNA will make sure all relevant ports are open.


 

Sitemap 1 2 3 4 5 6 7 8 9 10