I have 4 networked HX nodes that use ARS to call out on a remote corporate node's trunks. This works quite well, except when they check the Corporate node's reports in System Manager, PSTN call records, it never shows the dialed digits on calls made from the remote nodes. The other details are all there such as which trunk was used, what off-node extension made the call, call duration etc. Of course, dialed digits show fine for calls made from Corporate itself. I will note that corporate itself does not use ARS as its outgoing extension, but everyone else does. I must also note that I am inserting digits into every call which I'll show below. I checked all the SMDR settings to see that no nodes are suppressing any digits and I tried turning "Display Redirected Station" on for all nodes, I tried adding the trunks into the SMDR device list on the corporate node (but I think that's just for trunk to trunk calls). I tried adding off node devices to SMDR devices but that's simply not allowed. What am I missing?
Remote node flow (dialed digits not showing in SMDR / system manager reports):
[any remote node] -> Dial 8 -> ARS -> Facility Group Whichever -> Corporate Node -> Facility Group Whichever -> Trunk Group 92002 > Add *67P -> Add 1608 -> Echo 3 digits after toll, echo local address
Corporate call flow (dialed digits show fine in reports):
Dial 8 -> Trunk Group 92002
Any thoughts appreciated!