Author Topic: Pushing Caller ID From the PBX  (Read 1971 times)

Offline Navara2

  • Contributer
  • *
  • Posts: 10
  • Country: us
  • Karma: +0/-0
  • Laugh at your problems, everybody else does.
    • View Profile
Pushing Caller ID From the PBX
« on: March 05, 2013, 04:18:27 PM »
On these Mitels can I get the PBX to over ride the Carriers caller ID info? Seems I am having some caller ID issues with the doc names coming up now and we havent made any changes to our PBX's? Carrier has checked their Network and says its correct , but in making test calls it still comes up with the Docs name.If I can where can I make that change in the DB on a 5000.


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Pushing Caller ID From the PBX
« Reply #1 on: March 05, 2013, 04:39:46 PM »
Typically the PBX does not send NAME information out of the system, most carriers reject this, it is used for inter-PBX Q.SIG networking (not Mitel 5000 networking). Each user can have his/her own outbound caller ID number set, then the lookup is done on the far end to a database that "dips" the number to get name information it presents to the end user.


 

Sitemap 1 2 3 4 5 6 7 8 9 10