« previous next »
Pages: [1]   Go Down

Author Topic: 3300 ICP Insert pause does not work  (Read 5089 times)

Miteltech06

  • Guest
3300 ICP Insert pause does not work
« on: May 04, 2009, 01:01:03 PM »
Hi,

After we change from SX2000 to 3300 ICP we no longer can insert pauses when programming Speed dial numbers, I can see on the LCD Insert pause, I
Logged

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: 3300 ICP Insert pause does not work
« Reply #1 on: May 05, 2009, 07:28:07 AM »
It should see the pause, I use these on a regular basis.

Are you sure that the pause is long enough for that call?
Logged

Offline MitelMania

  • Jr. Member
  • **
  • Posts: 50
  • Karma: +0/-0
    • View Profile
Re: 3300 ICP Insert pause does not work
« Reply #2 on: May 05, 2009, 03:07:54 PM »
ive seen pauses sometimes fail where the T1 provides answer supervision back to the PBX.. esp if trying to insert digits on a trunk call...  the PBX will fail to outpulse the digits after the far end answers...
-Christopher
Logged

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: 3300 ICP Insert pause does not work
« Reply #3 on: May 05, 2009, 08:25:45 PM »
Try putting a # at the end of the number

912485551212#PPP1234
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10