Mitel Forums > Mitel MiVoice Business/MCD/3300

3300 ICP Insert pause does not work

(1/1)

Miteltech06:
Hi,

After we change from SX2000 to 3300 ICP we no longer can insert pauses when programming Speed dial numbers, I can see on the LCD Insert pause, I

Mattmayn:
It should see the pause, I use these on a regular basis.

Are you sure that the pause is long enough for that call?

MitelMania:
ive seen pauses sometimes fail where the T1 provides answer supervision back to the PBX.. esp if trying to insert digits on a trunk call...  the PBX will fail to outpulse the digits after the far end answers...
-Christopher

v2win:
Try putting a # at the end of the number

912485551212#PPP1234

Navigation

[0] Message Index