Mitel Forums > Mitel MiVoice Business/MCD/3300

Interconnect restriction trough Sip trunk

(1/4) > >>

sadzas:
Hi all!

Anyone knows how can I set the Interconnect restrictions and Intercept handling??

I wanna restrict the incoming calls trough SIP Trunk but only for a few extensions.

Example:

call ----> SIP trunk ----> IVR (...if you know the extension number, please dial it now...) ----> 300 ----> OK (300 is a valid option)

call ----> SIP trunk ----> IVR (...if you know the extension number, please dial it now...) ----> 200 ----> WRONG! (200 is not a valid option, so the prompt sounds again..)

Am I clear?

thanks all in advance!

ralph:
You have to set up a unique InterCO for (1) Sip Trunks, (2) Phones/devices you can talk to (3) Phones/devices you cannot talk to.
Restrict the SIP trunk InterCO from connecting to the InterCO of the Phone not allowed to talk to.

Next set up a dummy phone/exten number.  Forwarded it on an always to a phone forwarded to VM.
Set up a mailbox that says "you can't dial that, Dummy".
Next set up your InterCE form to intercept to the dummy extn number. 

This should then forward invalid dialing to the mailbox that says "You can't dial that, dummy."

Ralph

sadzas:
Thanks Ralph for the quickly answer... please help me with this:

--- Quote from: ralph ---You have to set up a unique InterCO for (1) Sip Trunks, (2) Phones/devices you can talk to (3) Phones/devices you cannot talk to.
Restrict the SIP trunk InterCO from connecting to the InterCO of the Phone not allowed to talk to.
--- End quote ---
Ok:
InterCO Availabled Phones: 1
InterCO Restricted Phones: 2
InterCO Sip Trunk: 3

Interconnect Restrictions:
From Interconnect Number --------- To Interconnect Number
1 - clear
2 - clear
3 - 2

ralph:
1st, be sure when you dial your dummy ext you get the message you want.
Then go to the Intercept Handling form and put the dummy number in the section for Interconnected restricted.

Ralph

sadzas:

--- Quote from: ralph on April 28, 2009, 12:00:31 PM ---1st, be sure when you dial your dummy ext you get the message you want.
Then go to the Intercept Handling form and put the dummy number in the section for Interconnected restricted.

--- End quote ---
I did it but is not working.

I don't understand.

Navigation

[0] Message Index

[#] Next page