« previous next »
Pages: [1]   Go Down

Author Topic: CRA - Blind Transfers?  (Read 1777 times)

Offline weisssj

  • Contributer
  • *
  • Posts: 14
  • Country: 00
  • Karma: +0/-0
    • View Profile
CRA - Blind Transfers?
« on: February 01, 2013, 01:12:18 PM »
I am using a CRA for auto-attendant use.  I have a seperate one for each mode - day/night.  If a caller dials an extension, and they do not answer, it is recalling back rather than going to that extension's voicemail.

I will say that I have it so when they dial 0 it rings a hunt group for the front area phones to all ring at once.  If they do not answer, I have it set to go to a different CRA that gives them the option to press a key to leave a message in their "general" mailbox.

What am I doing wrong here?

Appreciate any insight.
Logged

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: CRA - Blind Transfers?
« Reply #1 on: February 01, 2013, 01:49:19 PM »
The problem is that calls don't forward to voice mail after ringing the phone?

Either the station has no forward path to voice mail, or forwarding is turned off.
Logged

Offline weisssj

  • Contributer
  • *
  • Posts: 14
  • Country: 00
  • Karma: +0/-0
    • View Profile
Re: CRA - Blind Transfers?
« Reply #2 on: February 01, 2013, 02:01:19 PM »
Prior to using the CRAs - it was working as should.  Call an extension and it went to voicemail.
Logged

Offline DND ON

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 908
  • Country: us
  • Karma: +23/-0
    • View Profile
Re: CRA - Blind Transfers?
« Reply #3 on: February 01, 2013, 05:27:51 PM »
Make sure  AA/VM is enabled as a forward condition in the station forward path. By default, it enabled.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10