How to Block Incoming Calls Based on Caller ID - Mitel 3300

[Ronan]

I was at Mitel's French offices the other day and got confirmation that V9 will finally give us this option.

Too bad we'll not be able to use it right away as we would need to replace some hardware that will not be compatible with this version.

[ralph]

I stumbled across my original doc on how to do this.
I've made it available here


Ralph

[martyn]

FYI - with MiVB 9 this is native to the system and can be configured through caller based routing.

[Ronan]

Here is how to do this if you have an MBG and SIP trunks

http://phonesystemhelp.info/blog/2018/01/17/how-to-block-incoming-calls-on-mbg-using-sip/

The link doesn't work. If someone has an alternative.

[ralph]

Did you try this link?

I stumbled across my original doc on how to do this.
I've made it available here


Ralph

[PresidioDog]

Release 9 now supports this native in the MiVB

[Ronan]

Did you try this link?

I stumbled across my original doc on how to do this.
I've made it available here


Ralph

That one doesn't talk about MBG.

[ralph]

Ah.  If you're SIP trunks are routed through your MBG, send the caller to two invalid ICPs.
The call will fail.

Ralph

[Ronan]

Thanks I'll try that.

[artieouellette]

If you’re using nupoint van you can do it there much easier proving you’re using the auto attendant


Sent from my iPhone using Tapatalk

[artieouellette]

Are you using sip trunks or PRI? There are a few ways this can be done easily


Sent from my iPhone using Tapatalk

[pmhaynes]

Here is how to do this if you have an MBG and SIP trunks


http://phonesystemhelp.info/blog/2018/01/17/how-to-block-incoming-calls-on-mbg-using-sip/

new URL https://phonesystemhelp.info/how-to-block-incoming-calls-on-mbg-using-sip/

[Cableguy69]

Sorry to jump on an old thread. I am new here and looking for help integrating the Securelogix product mentioned by PC77375 with the MiVoice Business. The device is positioned between the MiVB and the MBG where the SIP Trunk terminates.
We are able to get inbound traffic routed through the ETM by creating it as an ICP in the MBG but having issues routing outbound traffic from the MiVB to the MBG proxying through the ETM. Of course SecureLogix has no interop or integration guide nor does Mitel. I would love to see the configuration on the ones mentioned at 4 locations in Houston.