Author Topic: any way to find out who is use his/her telephone?  (Read 2862 times)

Offline mehrdad

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
any way to find out who is use his/her telephone?
« on: August 07, 2012, 03:52:23 AM »


any way to find out who is use his/her telephone at this time?


Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: any way to find out who is use his/her telephone?
« Reply #1 on: August 07, 2012, 04:25:44 AM »
smdr logs? if enabled

Offline mehrdad

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: any way to find out who is use his/her telephone?
« Reply #2 on: August 07, 2012, 05:55:40 AM »
i need a software for showing "who is talking now", like "call status" in "avaya"

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: any way to find out who is use his/her telephone?
« Reply #3 on: August 07, 2012, 06:15:23 AM »
It's a bit cumbersome but you can try "Stat 1".
It will show you all the PLIDs and what state they are in.
Once you know the busy PLID you can enter "loc plid <PLID>" and it will show you the extension number.

Ralph

Offline mehrdad

  • Contributer
  • *
  • Posts: 6
  • Karma: +0/-0
    • View Profile
Re: any way to find out who is use his/her telephone?
« Reply #4 on: September 02, 2012, 01:34:26 AM »
thanks so usefull

Offline boycey9

  • Full Member
  • ***
  • Posts: 182
  • Karma: +4/-0
    • View Profile
Re: any way to find out who is use his/her telephone?
« Reply #5 on: September 03, 2012, 03:26:18 PM »
You could use the IP Phone Analyser, It is included within the MCD software package.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: any way to find out who is use his/her telephone?
« Reply #6 on: September 03, 2012, 05:27:44 PM »
You could use the IP Phone Analyser, It is included within the MCD software package.
boycey9,
I've never used that piece of software but don't you have to change your DHCP options and then reboot the phones to make that work?

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10