How to monitor the state of the nupoint port?

[august]

I try to find a command that let me know if my port are idle or busy.

I found the command VCCS, but this is not exactly what I'm looking for.

Is there something else?

[acejavelin]

What exactly are you looking for? vccs is the most common way to do this, you could also use 'stat ext <ext num>' in the 3300 to see what the ports are doing?

[v2win]

In the NuPoint go into system then do a shutdown it will ask if you really want to shutdown and will show all the ports and if they are idle or busy as well as the MWI queue.

[august]

Thanks, I will try it.

The VCCS command show too much info.  Each time a port received a call, you received all the info.  I just want the busy, idle....

[acejavelin]

Perhaps all you need is to put a BLF/DSS key for each Nupoint extension on a phone, perhaps on page 3 of a 5340 or something? This will let you monitor the status of each port in real time.

[august]

Good idea!!!

[v2win]

I had my hand slapped by tech support for that when it was DNIC integration I don't know about IP.

[acejavelin]

I had my hand slapped by tech support for that when it was DNIC integration I don't know about IP.

lol... if I had a nickel for every time tech support tried to slap my hand and said don't do that or it will never work, yet it worked fine... well, lets just say I would probably have enough nickels for the pop machine, but not enough to pay for lunch with them and tick off the waitress at TGI Fridays. Still, that's a fair amount of nickels...

Now, I wouldn't put a BLF key on 15 phones for each of the VM ports, but if it is just for 1 phone for you to monitor, probably not a big deal.