Hi guys,
Hoping one of you has seen this and can help, we have multiple Mitel 5000 boxes running fine, the only issue I have is that the CSM server is on a virtual Windows 2003 server image, this sits on top of the Mitel Linux image on the same physical box.
The 5000 gets it's NTP from our forest, this works fine, the Win 2003 gets it's time locally (as if it is using the CMOS clock), but it is really getting it's time from the Mitel Linux image (server manager).
Server Manager accepts an NTP server however it only polls once then stops.
The log entries look like this:
2012-06-28 15:17:35.911851500 28 Jun 15:17:35 ntpdate[24773]: step time server 10.3.10.1 offset -7.939575 sec
2012-06-28 15:17:36.129258500 28 Jun 15:17:36 ntpd[24770]: logging to file /dev/stdout
2012-06-28 15:17:36.192050500 28 Jun 15:17:36 ntpd[24770]: precision = 1.000 usec
2012-06-28 15:17:36.199057500 28 Jun 15:17:36 ntpd[24770]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
2012-06-28 15:17:36.199058500 28 Jun 15:17:36 ntpd[24770]: Listening on interface wildcard, 0.0.0.0#123 Disabled
2012-06-28 15:17:36.199059500 28 Jun 15:17:36 ntpd[24770]: Listening on interface lo, 127.0.0.1#123 Enabled
2012-06-28 15:17:36.199060500 28 Jun 15:17:36 ntpd[24770]: Listening on interface eth0, 10.35.10.2#123 Enabled
2012-06-28 15:17:36.199061500 28 Jun 15:17:36 ntpd[24770]: kernel time sync status 0040
2012-06-28 15:17:36.241114500 28 Jun 15:17:36 ntpd[24770]: frequency initialized 106.810 PPM from /etc/ntp/drift
2012-06-28 15:20:52.193011500 28 Jun 15:20:52 ntpd[24770]: synchronized to LOCAL(0), stratum 10
2012-06-28 15:20:52.193012500 28 Jun 15:20:52 ntpd[24770]: kernel time sync disabled 0001
I can force a sync by setting Server Manager to manual time then re-entering the NTP settings, then I resync the Windows image to this, I would rather have NTP work properly on the Server Manager Linux image of course.
Any suggestions appreciated.
Craig.
