Mitel Forums > Mitel MiVoice Business/MCD/3300

definitive Shell command guide?

<< < (2/10) > >>

v2win:
Mitel probably didn't know that either. ;D

MitelMania:
what mitel probably meant was they dudnt want you IPing into the RTC..  I was told by mitel Never to use the CDE forms in the RTC shell..  and on one of ,my lab systems purposely made programming changes in the RTC shell  (old sx-2000 forms) and sure enough corrupted the database....   at the time I was trying to come up with a faster modem dialup procedure rather than the MAP and using the bandwidth heavy ESM.... (so,me of our customers dont like giving us IP access)
-Christopher

ralph:

--- Quote from: MitelMania on February 23, 2009, 09:17:13 AM ---what mitel probably meant was they dudnt want you IPing into the RTC.. 
--- End quote ---

Nope.  They meant the command shell.

Ralph

DirtyHarry:
Hi, you can get away with programming via the backdoor sx2000 style gui but the only way to ensure that the changes are reflected on the esm gui is to do a data restore. As for the shell commands, no way are Mitel gonna give them out unless it is in their interest like the one they give out to turn off visual vmail following their cockup in 8 ur3, this command is given out in the release notes for 8 ur5  ;)

v2win:
Here are some of the commands shamelessly stolen from another site

iPVM_Status - displays status of embedded VM
iPVM_Stop - stops embedded VM
iPVM_Start - starts embedded VM
ShowDspStatus - shows status of DSP's
ps - shows active processes and time running
i - shows all current tasks (warning: output is very large)
arptabShow - shows active ARP table (IP's and MAC's on local network)
ping "<target ip address>" - ping test, use <Ctrl-C> to exit
bootChange - edit bootline parameters
version - displays bootline parameters
relink_version - shows if any relinks (patches) have been applied
revs - displays bootrom versions

Navigation

[0] Message Index

[#] Next page

[*] Previous page