Mitel Forums > Mitel MiVoice Business/MCD/3300

definitive Shell command guide?

<< < (4/10) > >>

Chakara:
  Not yet - I know that some @ Mitel are aware of the site but nothing.  My hope is that as Mitel is a good system this site won't turn into a Mitel bashing site, and thus presents Mitel in a positive way.  As to the stuff above - well, it's useful to techs and is not warranted by Mitel Forums in any way shape or form :)

Chak

ralph:
Does anyone know if there is a tracert command avail in the RTC?

~Ralph

ralph:
xmirror "2 1"   Mirror Ethernet ports 2 to port 1 on the MXe controller.

Ralph

MitelMania:
tracert "xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the IP address or hostname to traceroute to(you need the quotes)..  that works for me in the port 2002 shell

do a netHelp (case sensitive) and you will get all kinds of network commands you can do. all the RTC shell commands are case sensitive

-Christopher

ralph:
I could've swore I tried the tracert command in that format.
But when I got it right I was able to solve a problem with a Teleworker issue I've been having.

Thanks MitelMania!

Ralph

Navigation

[0] Message Index

[#] Next page

[*] Previous page