How to Block Incoming Calls Based on Caller ID - Mitel 3300

[Ronan]

I was at Mitel's French offices the other day and got confirmation that V9 will finally give us this option.

Too bad we'll not be able to use it right away as we would need to replace some hardware that will not be compatible with this version.

[ralph]

I stumbled across my original doc on how to do this.
I've made it available here


Ralph

[martyn]

FYI - with MiVB 9 this is native to the system and can be configured through caller based routing.

[Ronan]

Here is how to do this if you have an MBG and SIP trunks

http://phonesystemhelp.info/blog/2018/01/17/how-to-block-incoming-calls-on-mbg-using-sip/

The link doesn't work. If someone has an alternative.

[ralph]

Did you try this link?

I stumbled across my original doc on how to do this.
I've made it available here


Ralph

[PresidioDog]

Release 9 now supports this native in the MiVB

[Ronan]

Did you try this link?

I stumbled across my original doc on how to do this.
I've made it available here


Ralph

That one doesn't talk about MBG.

[ralph]

Ah.  If you're SIP trunks are routed through your MBG, send the caller to two invalid ICPs.
The call will fail.

Ralph

[Ronan]

Thanks I'll try that.

[artieouellette]

If you’re using nupoint van you can do it there much easier proving you’re using the auto attendant


Sent from my iPhone using Tapatalk

[artieouellette]

Are you using sip trunks or PRI? There are a few ways this can be done easily


Sent from my iPhone using Tapatalk

[pmhaynes]

Here is how to do this if you have an MBG and SIP trunks


http://phonesystemhelp.info/blog/2018/01/17/how-to-block-incoming-calls-on-mbg-using-sip/

new URL https://phonesystemhelp.info/how-to-block-incoming-calls-on-mbg-using-sip/