Mitel Forums > Mitel MiVoice Business/MCD/3300

Outlook Voice Access (OVA) - MITEL 3300

(1/1)

steverowlands:
Hi guys,

We're looking at running Outlook Voice Access (OVA) in conjunction with the 3300. Can anyone advise on how to:

(1) Setup a pilot number
(2) Forward all calls incoming on the pilot number (our Subscriber Access Number extension) to the Exchange UM Server's IP address

Any help will be welcomed  :D

ralph:
Just went through this exersie. 
My roll was to program the 3300.  The exchange stuff is still black magic to me.

Set up your SIP trunk group and point a number to it.
Program a speed dial to go to the SIP route.
Forward your phones to the speed dial.

Ralph

steverowlands:
Hi Ralph,

Thanks for the info.

Can you tell me how to setup a SIP trunk group...

Many thanks  ;D

ralph:
Copied this directly from our SIP Peer Profile form:

SIP Peer Profile Label:    Exchange   
Network Element:    Exchange     
 
Local Account Information
  Registration User Name:       
  Address Type:    IP Address: 192.168.203.11   
 
Outbound Proxy Server:       
 
Calling Line ID
  Default CPN:       
  Restriction:    False   
 
 
Policies
  Trunk Service:    1   
  Interconnect Restriction:    1   
  Maximum Simultaneous Calls:    6   
  Session Timer:    0   
  Zone:    1   
  SMDR Tag:    9988   
  NAT Keepalive:    False   
  Enable Mitel Proprietary SDP:    Yes   
  Use P-Asserted Identity Header:    No   
  Use Restricted Character Set For Authentication:    No   
  Disable Reliable Provisional Responses:    Yes   
  Use Alternate Destination Domain:    No   
  FQDN or IP Address:       
  Ignore Incoming Loose Routing Indication:    No   
  Suppress Use of SDP Inactive Media Streams:    No   
  Enable Special Re-invite Collision Handling:    No   
  Enable sending '+' for E.164 numbers:    No   
  Force sending SDP in initial Invite message:    No   
  Use To Address in From Header on Outgoing Calls:    No   
  Force Answer - send SDP in initial Invite:    Yes   
  Prevent the Use of IP Address 0.0.0.0 in SDP Messages:    No   
  Use P-Preferred Identity Header:    No   
  Route Call Using To Header:    No   
  Private SIP Trunk:    No   
  Public Calling Party Number Passthrough:    No   
  Use Diverting Party Number as Calling Party Number:    No   
  Build Contact Using Request URI Address:    No   
 
 
Authentication
  User Name:       
  Password:    *******     
  Confirm Password:    *******     
 
Authentication Option for Incoming Calls:    No Authentication   

Ralph

ralph:
There is a "How To Guide" on MOL.   It's too large for me to upload here so if you don't have access PM me with your email and I'll try to email it too you.

Ralph

Navigation

[0] Message Index