Author Topic: How to get multiple phones ring on Different MCD via, ring group or hunt group  (Read 2565 times)

Offline TimPNRHA

  • Jr. Member
  • **
  • Posts: 47
  • Karma: +0/-0
    • View Profile
We are currently looking at moving our scheduling department to only have one 1-800 number for staff to call into. I currently have 5 locations with there own controller. I have the 1-800 number coming on 1 of the PRI's but when I try to program a ring group it will not allow me to add remote DN's. The 1-800 number gets directed to nupoint, so I was going to have a blind transfer for scheduling to a ring group but cannot.

How can I accomplish this?


Offline boycey9

  • Full Member
  • ***
  • Posts: 182
  • Karma: +4/-0
    • View Profile
you need to use multiline buttons on the system the number belongs to then DSS/BLF on the remote systems set to ring cont. You will also need to set up remote blf's for them to ring


 

Sitemap 1 2 3 4 5 6 7 8 9 10