Author Topic: Mitel 3300 Voicemail to Email  (Read 11958 times)

Offline plee61

  • Contributer
  • *
  • Posts: 22
  • Karma: +0/-0
    • View Profile
Mitel 3300 Voicemail to Email
« on: December 29, 2011, 01:37:51 AM »
Hi,
I haven't recently change the IP address of my Mxe controller, and my voicemail to email function stopped working.
But it worked fine before.

I wonder where about in Exchange is set to accept email from the controller node?

Cheers,
Hannah
« Last Edit: December 29, 2011, 07:37:58 AM by ralph »


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Voicemail to Email
« Reply #1 on: December 29, 2011, 07:37:41 AM »
Look through your logs to see if you're getting rejected.   If you don't see any logs related to email then I'd look at the exchange server.   Logs only show up when the PBX thinks there's a problem.

Ralph

Offline CS1KE_MA

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: Mitel 3300 Voicemail to Email
« Reply #2 on: December 29, 2011, 03:36:02 PM »
How can I check logs on MITEL? I am new to MITEL.
Thanks

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel 3300 Voicemail to Email
« Reply #3 on: December 29, 2011, 03:52:24 PM »
Under the maintenance section there is a section for reading "all software and maintenance logs"

Ralph

Offline plee61

  • Contributer
  • *
  • Posts: 22
  • Karma: +0/-0
    • View Profile
Re: Mitel 3300 Voicemail to Email
« Reply #4 on: December 29, 2011, 04:49:03 PM »
I do get error for when a VM is diverted to my mail box:
VPIM: CSMTPClientMsg::ProcessResult - Failed sending Voice Mail to Email: From Vpim: To Mailbox: 9388 To Domain: <EMAIL Deleted by Admin> File Name: N_V4efcdfc0.01b.
VPIM: CSMTPClientMsg::ProcessResult - Look into SOCKET error number <786434> <0> bytes transferred.

Where is the configuration in Exchange?
« Last Edit: December 29, 2011, 07:37:37 PM by ralph »

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: Mitel 3300 Voicemail to Email
« Reply #5 on: December 29, 2011, 05:29:12 PM »
What version of Exchange? You will want to look at your receive connector in hub transport. You might have a relay restriction setup from the old ip and it just needs to be updated.
« Last Edit: December 30, 2011, 10:53:51 AM by brantn »

Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel 3300 Voicemail to Email
« Reply #6 on: December 29, 2011, 07:40:06 PM »
I deleted out the email address out of the log entry you posted.  No point in getting that address slammed with spam.

You can check your email server IP address assigned in the 3300 under "System Options Assignment".
Go to
  All Forms-->>System Options assignment

Ralph

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: Mitel 3300 Voicemail to Email
« Reply #7 on: January 03, 2012, 04:56:11 PM »
What version of Exchange? You will want to look at your receive connector in hub transport. You might have a relay restriction setup from the old ip and it just needs to be updated.
Yep this will be your problem. If it is Exchange 2007 or 2010 then you will have to modify the receive connector in hub transport, otherwise if it is exchange 2003 let us know as the procedure is different.

The receive connector only accepts mail from the IP addresses that it is told to allow from, especially as this is usually set up to allow anonymous relaying from internal hosts.


 

Sitemap 1 2 3 4 5 6 7 8 9 10