Mitel Forums > Mitel MiVoice Business/MCD/3300

SX-200 Bay

<< < (2/2)

Mattmayn:
I had two different BCC III cards that I tried, neither of them worked.

MitelMania:
make sure you didnt accidentilly kill the BCC card by not waiting long enough for it to come up... remember it has to download its firmware from the PBX when it boots up and sees a different version than is what is already on the card....

I had more than one of my techs brick BCC-III cards on the 200-EL that way  (then id have to reload them manually)...

you can watch the BCC-III card load by connecting to the printer port of the SX-200 Bay and hyper-terminal at 38400,N,8,1..  if the card boots and just says "waiting for AFC" it means it hasnt seen the 3300...  if the card gives you an error like "cant find bcc3.o" the card has lost its programming....
-Christopher

Northeaster:
Chris - Great info.  I didn't know you could watch the BCCIII card communicate!!

Thanks!

Mattmayn:
Thats a new tip for me, I have a feeling that I waited long enough (24 hours).

I will try your tip sometime soon.

Navigation

[0] Message Index

[*] Previous page