Author Topic: DID on a sip trunk  (Read 2472 times)

Offline etailleur

  • Contributer
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
DID on a sip trunk
« on: March 27, 2012, 09:59:08 AM »
I'm looking to ring a different extension on different incoming DID from a sip trunk. Any help ?


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: DID on a sip trunk
« Reply #1 on: March 27, 2012, 10:37:13 AM »
Take the DID, lets say it's 5555, and program it as a system speed dial. 
The actual number will be the extension you want the DID to ring, such as 6666.

Ralph

Offline etailleur

  • Contributer
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: DID on a sip trunk
« Reply #2 on: March 27, 2012, 02:13:52 PM »
I'm not sure i understand well....i want to redirect two DID, from a sip trunk provider (callcentric) at two different internal extensions...

I'M able to dial in with the trunk profile but unable to redirect to compute the did number to ring on different extensions...

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: DID on a sip trunk
« Reply #3 on: March 28, 2012, 12:40:23 PM »
What Ralph is saying is that you can use System Speed Calls to translate your DID to your internal extension numbers. You could also use a multicall appearance of the DID on the extension, make the DID a pilot number of a ring group or hunt group.

Does that help? If not, give us the DID number (last four only) and the extension(s) you wish to ring and we will make it more specific.


 

Sitemap 1 2 3 4 5 6 7 8 9 10