Author Topic: Outgoing CLI  (Read 2175 times)

Offline ASCStech

  • Jr. Member
  • **
  • Posts: 48
  • Karma: +0/-0
    • View Profile
Outgoing CLI
« on: November 13, 2011, 06:30:20 PM »
We have a customer CXIIi connected by IP trunks to our 3300 MXE. Both are running MCD 4.2. The customer site only has access to the PSTN via a PRI link on our MXE. The PRI link is dedicated for their use only. Problem is that their site is 3 digit numbering and our's is 4 digits and when it comes to outgoing CLI on their link only the main number is being presented. I have gone to add the 4xx to the CPN substitution form but as the current entries are 4 digit i cant add the 3 digit.
Is there any way to change the presentation of the outgoing CLI from the customer PABX over the IP trunks so that it presents 4 digits (94xx) instead.
The customer does not want 4 digit dialling on site.
Hopefully this makes sense.
Cheers
Chris


Offline MitelUK2010

  • Sr. Member
  • ****
  • Posts: 201
  • Country: gb
  • Karma: +0/-0
    • View Profile
Outgoing CLI
« Reply #1 on: November 14, 2011, 02:12:36 AM »
Can this not be done using associated directory numbers? If you look at the help section on cpn, you can do it in 2 ways system wide a dn based cpn. I believe system wide you cannot do it with multiple digit lengths.

Offline ASCStech

  • Jr. Member
  • **
  • Posts: 48
  • Karma: +0/-0
    • View Profile
Re: Outgoing CLI
« Reply #2 on: November 14, 2011, 11:48:28 PM »
Thanks MitelUK2010, associated directory number worked a treat.
Didn't really know that form existed or what it did.
Cheers
Chris

Offline MitelUK2010

  • Sr. Member
  • ****
  • Posts: 201
  • Country: gb
  • Karma: +0/-0
    • View Profile
Outgoing CLI
« Reply #3 on: November 15, 2011, 01:42:39 AM »
Not a problem. Form can also be used to set up a hotline.


 

Sitemap 1 2 3 4 5 6 7 8 9 10