Author Topic: Mitel SX2000 Partition  (Read 4045 times)

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Mitel SX2000 Partition
« on: November 07, 2011, 08:39:14 AM »
I can't remember the answer to this:

When you partition a redundant 2k does it force you to put the inactive plane in read only mode?

Here's the reason I'm asking.   One of my PM has a major MAC and needs to pre-program a system before moving it to a new location.   The system has to remain up and operational while making the changes.   So the thought is to partition it and make all the changes on the inactive plane then switch to it during the move.   This can't be done if we have to put the inactive plane in read only mode.

Ralph


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel SX2000 Partition
« Reply #1 on: November 07, 2011, 01:33:53 PM »
Just remembered thanks to a lunch time nap.

You can program off line.
What I was remembering about the 'read only' has to do with doing a disk to disk copy.

This shouldn't be a problem.

Ralph
« Last Edit: April 23, 2014, 04:19:47 PM by ralph »

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: Mitel SX2000 Partition
« Reply #2 on: November 10, 2011, 06:53:35 AM »
You're right.

This is why you can upgrade the inactive side and have two different partition.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel SX2000 Partition
« Reply #3 on: November 10, 2011, 07:42:31 AM »
I cut my teeth on the 2k way back in '86.  It's amazing how much you can forget so quickly.   
Maybe that just suggest I'm old.

Ralph

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: Mitel SX2000 Partition
« Reply #4 on: July 24, 2012, 04:24:46 PM »
I still miss wizzing around cde...could still make changes faster than todays ESM  :)

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel SX2000 Partition
« Reply #5 on: July 24, 2012, 04:37:33 PM »
I'm with you on that one!
I started the 2k in "E" stream.  - no menus at all.
When the 3300 1st came out I still did everything from the telnet session.
I kept getting yelled at by Mitel tech support.   There never was a time when I did something is telnet that messed up the system.

Ralph
« Last Edit: July 24, 2012, 04:39:27 PM by ralph »


 

Sitemap 1 2 3 4 5 6 7 8 9 10