« previous next »
Pages: [1]   Go Down

Author Topic: Not Getting MWI on Mitel 200  (Read 2898 times)

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Not Getting MWI on Mitel 200
« on: September 20, 2011, 02:41:56 PM »
I don't work on the 200 platform often so I am at a loss on this one. I have a customer that has a 200 ICP (not sure what rel.) that is not getting MWI. Is there a location to enter a FAC like the 3300s? Or should it just work? It has been running fine for years so I am wondering if something is going on with one of the ports.
« Last Edit: April 06, 2013, 11:22:37 AM by ralph »
Logged

Offline phoneguy527

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: MWI
« Reply #1 on: October 27, 2011, 12:50:41 PM »
I to have the same issue where MWI failed to notify end users that they have messages.

Mitel SX-200 CXi
Release: 4.0.0.17
 
Logged

Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: MWI
« Reply #2 on: December 07, 2011, 02:02:46 PM »
What I ended up doing was an upgrade to 5.0 and everything started working again. Sorry for the delay.
Logged

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: MWI
« Reply #3 on: December 08, 2011, 06:56:32 AM »
There is a feature access code that let you test the MWI.

I don't remember the name but probably something like Message Waiting......
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10