Author Topic: How to set up a line key (Multiline set key assignment)?  (Read 3847 times)

Offline dexs345

  • Contributer
  • *
  • Posts: 20
  • Karma: +0/-0
    • View Profile
How to set up a line key (Multiline set key assignment)?
« on: August 11, 2011, 08:00:51 AM »
Hello,

i am relatively new to the mitel and am having a few small issues with the button configuration of the ip phones.

I have isdn 30 with 12 channels. i would like to setup my key config so that i know which line is in use and which isnt.

I have tried setting up a button as a single line linked to the trunk number but this doesnt seem to work.  i get an error message saying the directory number is in use.

I am more familiar with the Panasonic where you can have a button setup per line.

Any help would be greatly appreciated.

Thanks for your time

Regards

Dexs


Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: How to set up a line key (Multiline set key assignment)?
« Reply #1 on: August 11, 2011, 10:15:09 AM »
There is not a real easy solution as what you are trying to do is make a voip pbx into a key system. You can do direct line select with a FAC but as far as lighting a light that is another story that someone can give more information on. I try to really steer people away from this as it makes a mess in programming and negates the power of voip pbx.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: How to set up a line key (Multiline set key assignment)?
« Reply #2 on: August 11, 2011, 10:59:40 AM »
I agree with brantn,
You really can't do what you're asking for on the 3300.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10