Hotdesking on a 5312

[toolbox123]

Hi,

I would like to setup hotdesking between 5312 units.  Everything is fine with the programing but there are no soft keys to press for the hotdesk key?  Even when I use the feature access code, I then get past the hotdesk button problem but I am then presented with a login button that needs to be presented to go to the next screen.  Any ideas on how to make this work?

Thanks.

[Mitel100]

After you enter your FAC select login, enter your hotdesk number followed by #, then enter your hotdesk pin followed by #. You should then be logged into the hotdesk account.

[toolbox123]

Howdy,

That will work once you get past the login (I tried it on a 5224).  On the 5312, on the screen it says login, no soft key to push to confirm.  Pound and star don't work at this screen.

Hope that makes sense.

[Mitel100]

This is the process from the tech docs:

1 - Dial the Hot Desking Login access code.
2 - Press *.
3 - Enter your Hot Desk User Extension Number.
4 - Press #.
5 - Enter your User PIN.
6 - Press #.

If the login process is not working then make sure the COS of the phone has hotdesking enabled.

[toolbox123]

Thanks.  It was in the wrong class of service.  Everything is working as you described.