Author Topic: 3300 does not send back G.711 in 200 OK  (Read 13428 times)

Offline wyeee

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
3300 does not send back G.711 in 200 OK
« on: June 16, 2011, 11:09:18 AM »
I am using some softphones connected to Asterisk to test G.711 codec for Mitel 3300.

* INVITE from Asterisk to Mitel 3300 has rtpmap for 0 (uLaw), 8 (aLaw), 18 (G.729), and 101 (telephone-event).

* 200 OK from Mitel to Asterisk has only rtpmap of 101 (telephone-event)

(If I used a generic sip phone for Mitel, I can also see INVITE from 3300 to sip phone has no codec and
200 OK from sip phone has 0,8,18,101 in codec list)

The voice path is OK. I verified that between my softphone and Asterisk uLaw is used.

Two questions:
1. Why 0 (uLaw) is not include in the 200 OK from 3300 to Asterisk? I thought 3300 support both G.711 and G.729 (just learned that need to change zone info for G.729 to work).
2. What is the actual codec being used between 3300 and Asterisk (SDP contains no codec but telephone-event)? Uncompressed/raw voice? uLaw? (I know Asterisk is capable of transcoding if there is a mismatch)

Thanks a lot


Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #1 on: June 16, 2011, 12:07:48 PM »
I would have to setup a new box and get a capture but all the past captures I have looked at and seen the Mitel supports 711 and 729. As you said in order to use 729 you need to be in a different zone.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #2 on: June 16, 2011, 12:09:10 PM »
Are you trying to connect to the Mitel as an extension or a SIP trunk?

Ralph
« Last Edit: April 22, 2014, 10:29:38 AM by ralph »

Offline wyeee

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #3 on: June 16, 2011, 03:25:33 PM »
Thanks a lot guys.

I am doing SIP trunking test between Mitel 3300 and Asterisk.
We have our own PBX in between (so there is a SIP trunk between Asterisk and our PBX and there is another SIP trunk between our PBX and Mitel 3300). Our PBX is not anchoring the call (it just routes it, SDP is not changed).
And here is the log (softphone 2408150 off Asterisk calls Mitel phone running Minet, 2258100. Logs are captured from our PBX):

Incoming Ingress Request
INVITE sip:2258100@192.168.80.146:5080 SIP/2.0^M
Via: SIP/2.0/UDP 192.168.80.120:5060;branch=z9hG4bK53c653ea;rport=5060^M
From: "3CX admin" <sip:2408150@192.168.80.120>;tag=as2d832122^M
To: <sip:2258100@192.168.80.146:5080>^M
Contact: <sip:2408150@192.168.80.120>^M
Call-ID: 499274757b8ca33243049f5379eb9d70@192.168.80.120^M
CSeq: 102 INVITE^M
User-Agent: Asterisk PBX^M
Max-Forwards: 70^M
Date: Thu, 16 Jun 2011 18:19:37 GMT^M
Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY^M
Content-Type: application/sdp^M
Content-Length: 289^M
^M
v=0^M
o=root 1888 1888 IN IP4 192.168.80.120^M
s=session^M
c=IN IP4 192.168.80.120^M
t=0 0^M
m=audio 12592 RTP/AVP 0 8 18 101^M
a=rtpmap:0 PCMU/8000^M
a=rtpmap:8 PCMA/8000^M
a=rtpmap:18 G729/8000^M
a=fmtp:18 annexb=no^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-16^M
a=silenceSupp:off - - - -^M

Outgoing Egress Request
INVITE sip:2258100@mitel1.tango-networks.com:5060;transport=udp;maddr=192.168.80.143 SIP/2.0^M
Via: SIP/2.0/UDP 192.168.80.146:5080;branch=z9hG4bK16409b6ecd0e22515d2d247448c33bf7;rport^M
From: <sip:2408150@system;transport=udp>;tag=TiBriA^M
To: <sip:2258100@mitel1.tango-networks.com;transport=udp>^M
Contact: <sip:192.168.80.146:5080;transport=udp;lr>^M
Call-ID: cf2412c3-f200-4379-a38a-7947b2fc44f6^M
CSeq: 100 INVITE^M
Max-Forwards: 69^M
Date: Thu, 16 Jun 2011 18:19:37 GMT^M
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY^M
Content-Type: application/SDP^M
Content-Length: 289^M
P-Asserted-Identity: <sip:2408150@system;transport=udp>^M
Remote-Party-ID: <sip:2408150@system;transport=udp>;party=calling^M
^M
v=0^M
o=root 1888 1888 IN IP4 192.168.80.120^M
s=session^M
c=IN IP4 192.168.80.120^M
t=0 0^M
m=audio 12592 RTP/AVP 0 8 18 101^M
a=rtpmap:0 PCMU/8000^M
a=rtpmap:8 PCMA/8000^M
a=rtpmap:18 G729/8000^M
a=fmtp:18 annexb=no^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-16^M
a=silenceSupp:off - - - -^M

Incoming Egress Response
SIP/2.0 180 Ringing^M
Via: SIP/2.0/UDP 192.168.80.146:5080;branch=z9hG4bK16409b6ecd0e22515d2d247448c33bf7;rport^M
From: <sip:2408150@system;transport=udp>;tag=TiBriA^M
To: <sip:2258100@mitel1.tango-networks.com;transport=udp>;tag=0_590921104-91056377^M
Call-ID: cf2412c3-f200-4379-a38a-7947b2fc44f6^M
CSeq: 100 INVITE^M
Contact: <sip:2258100@192.168.80.143:5060;transport=udp>^M
Server: Mitel-3300-ICP 10.2.0.26_2^M
Content-Length: 0^M
^M

Outgoing Ingress Response
SIP/2.0 180 Ringing^M
Via: SIP/2.0/UDP 192.168.80.120:5060;branch=z9hG4bK53c653ea;rport=5060^M
From: "3CX admin" <sip:2408150@192.168.80.120>;tag=as2d832122^M
To: <sip:2258100@192.168.80.146:5080>;tag=0_590921104-91056377^M
Call-ID: 499274757b8ca33243049f5379eb9d70@192.168.80.120^M
CSeq: 102 INVITE^M
Contact: <sip:192.168.80.146:5080;abrazohostnode=192.168.80.146;transport=udp;lr>^M
Content-Length: 0^M
^M

Incoming Egress Response
SIP/2.0 200 OK^M
Via: SIP/2.0/UDP 192.168.80.146:5080;branch=z9hG4bK16409b6ecd0e22515d2d247448c33bf7;rport^M
From: <sip:2408150@system;transport=udp>;tag=TiBriA^M
To: <sip:2258100@mitel1.tango-networks.com;transport=udp>;tag=0_590921104-91056377^M
Call-ID: cf2412c3-f200-4379-a38a-7947b2fc44f6^M
CSeq: 100 INVITE^M
Contact: <sip:2258100@192.168.80.143:5060;transport=udp>^M
Allow: INVITE,BYE,CANCEL,ACK,INFO,PRACK,OPTIONS,SUBSCRIBE,NOTIFY,REFER,REGISTER,UPDATE^M
Content-Type: application/sdp^M
Server: Mitel-3300-ICP 10.2.0.26_2^M
Content-Length: 170^M
^M
v=0^M
o=- 546 546 IN IP4 192.168.80.235^M
s=-^M
c=IN IP4 192.168.80.235^M
t=0 0^M
m=audio 50082 RTP/AVP 0 101^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-15^M
a=ptime:80^M

Outgoing Ingress Response
SIP/2.0 200 OK^M
Via: SIP/2.0/UDP 192.168.80.120:5060;branch=z9hG4bK53c653ea;rport=5060^M
From: "3CX admin" <sip:2408150@192.168.80.120>;tag=as2d832122^M
To: <sip:2258100@192.168.80.146:5080>;tag=0_590921104-91056377^M
Call-ID: 499274757b8ca33243049f5379eb9d70@192.168.80.120^M
CSeq: 102 INVITE^M
Contact: <sip:192.168.80.146:5080;abrazohostnode=192.168.80.146;transport=udp;lr>^M
Allow: REGISTER,REFER,NOTIFY,SUBSCRIBE,OPTIONS,PRACK,INFO,ACK,CANCEL,BYE,INVITE^M
Content-Type: application/SDP^M
Content-Length: 170^M
^M
v=0^M
o=- 546 546 IN IP4 192.168.80.235^M
s=-^M
c=IN IP4 192.168.80.235^M
t=0 0^M
m=audio 50082 RTP/AVP 0 101^M
a=rtpmap:101 telephone-event/8000^M
a=fmtp:101 0-15^M
a=ptime:80^M



Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #4 on: June 16, 2011, 04:04:53 PM »
I can send you a How To. 
Don't want to post it since it isn't mine.
PM me with your email

Ralph

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #5 on: June 16, 2011, 04:16:05 PM »
I would have to do some digging but looking at your captures it is listing all options that it can talk for rtp the first one will take precedence ie U Law. I believe 200s don't show as they are events not audio traffic or an sdp. If you have RTP traffic it should show the codec being used. Is the problem no audio, call fails, or just curious?

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #6 on: June 16, 2011, 04:31:35 PM »
Do you have compression licenses and available DSP ports?

Offline wyeee

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #7 on: June 16, 2011, 04:49:21 PM »
The 2 way audio is there.
Sometimes I hear noise on Mitel phones (sometimes OK).
I have wireshark set up on the box running softphones.

Any idea on how to run wireshark from Mitel 3300?

Checked my license file:
 In Trunking/Networking section
  Compression License: 0

Does that mean G.711 is disabled?

If I change from zone 1 to zone 2 (which has compression set to YES), I can see G.729 in SDP of 200 OK. But, Asterisk ends the call immediately because it refuses to do transcoding with G.729.

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #8 on: June 16, 2011, 04:52:13 PM »
Compression licenses are only needed if you are doing T.38 and a few other things. It will use G711 by default. There is no way to wireshark on the Mitel but you could mirror the controller port in the switch to another port and capture that way.

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #9 on: June 16, 2011, 05:05:01 PM »
I also looked at a regular sip call since I do not have an asterisk box anymore and wireshark does show G.711 ULaw Media Type with 101 Media Attribute telephone event on 200 OK.

Offline wyeee

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #10 on: June 16, 2011, 06:03:48 PM »
You mean from 3300?

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #11 on: June 16, 2011, 07:48:20 PM »
Was a normal call to an itsp.

Offline wyeee

  • Contributer
  • *
  • Posts: 18
  • Karma: +0/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #12 on: June 17, 2011, 09:58:02 AM »
Call from Mitel to itsp? So 200 OK is from itsp to Mitel, right?

I guess in my case the codec used between Mitel and Asterisk is Ulaw, since I recorded my MOH and AA in ULaw and I can hear them OK from my softphone.

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #13 on: June 17, 2011, 10:55:26 AM »
Yes that is correct the point being Media Attribute is as you are seeing of Telephone-Event but does show type in wireshark as G711 ULaw.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: 3300 does not send back G.711 in 200 OK
« Reply #14 on: June 17, 2011, 11:28:07 AM »
Actually you do need compression licenses if you are doing G.729 out SIP trunks.

If you want to wireshark the Mitel audio you can turn the encryption off in systems options.


 

Sitemap 1 2 3 4 5 6 7 8 9 10