Author Topic: Mitel IVR Setup Question  (Read 4648 times)

Offline acskking

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Mitel IVR Setup Question
« on: May 25, 2011, 04:46:46 PM »
Hello. We have recently installed a 4 port IVR solution and integrated with our Mitel 3300 (4.1). The setup recommended is a hunt group scenario. We now have a test pilot setup. IVR ports for access to pilot are setup as Generic SIP phone currently which provides the 5th caller with a busy signal if all 4 ports are busy. The thought is to add a hunt group with app server ports as members to hunt group? Again, this provides a busy signal. Can I setup an ACD queue to queue callers until the ports become available? If so, how could this be setup? Any assistance would be appreciated. Thanks 


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel IVR Setup Question
« Reply #1 on: May 26, 2011, 09:39:43 AM »
Try adding a RAD to the hunt group to add "all ports busy" message.   
That should allow calls to queue to the group.

Ralph
« Last Edit: March 03, 2014, 08:10:53 AM by ralph »


 

Sitemap 1 2 3 4 5 6 7 8 9 10