Author Topic: SMTP Password / Authentication for the emailing of VM attachements  (Read 4521 times)

Offline andrewlondon

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
We have a 3300 system and switch hosted Exchange service the new service requires authenticated SMTP.
The 3300 doesn't have a field to put in a password.

So Voice Mails that get left do not get forwarded as attachements.

I have tried to find a work around for instance using Gmail or hotmail but these days everyone has locked down there email servers to cut down on spam.

Does anyone have a work around?

Thank you,

Andrew
« Last Edit: March 25, 2011, 11:45:30 AM by andrewlondon »


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: SMTP Password / Authentication for the emailing of VM attachements
« Reply #1 on: March 25, 2011, 01:41:09 PM »
I don't know about hosted Exchange, but I suspect that the exchange server will have to allow emails from your IP.

We were struggling with something similar with a Nupoint and gmail.
What we figured out was we could send the emails to a mailbox I created on one of my domains and then forward it from there.
I hear Mitel is going to fix that in an upcoming release so we wouldn't have to do that.  But I'd lay odds that the embedded vm would work the same way..

Ralph
www.aavoicepro.com

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: SMTP Password / Authentication for the emailing of VM attachements
« Reply #2 on: March 31, 2011, 07:43:56 PM »
Yes you will need a mail relay enabled server that does not require authentication. Never noticed that there is not a password option.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: SMTP Password / Authentication for the emailing of VM attachements
« Reply #3 on: April 01, 2011, 08:54:28 AM »
So here's a thought.
How hard or quickly could a Linux server be set up as an open relay that would only exist on the internal network?

Ralph

Offline jamsignal

  • Contributer
  • *
  • Posts: 10
  • Karma: +0/-0
    • View Profile
Re: SMTP Password / Authentication for the emailing of VM attachements
« Reply #4 on: April 02, 2011, 10:26:33 PM »
You could use any linux server to relay with a basic install. You also may be able to use the smtp server of your Internet provider.

Offline stevek

  • Jr. Member
  • **
  • Posts: 56
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: SMTP Password / Authentication for the emailing of VM attachements
« Reply #5 on: April 20, 2011, 07:24:31 AM »
Use Ubuntu and Post Office any desktop PC will surfice and with Post Office the configuration files make sense unlike "sendmail"   :(

I got this set up in a couple of hours - remember google is your friend - lol


 

Sitemap 1 2 3 4 5 6 7 8 9 10