Author Topic: SDS issue...DEI Storage Adaptor class  (Read 3880 times)

Offline Ray B

  • Contributer
  • *
  • Posts: 13
  • Karma: +0/-0
    • View Profile
SDS issue...DEI Storage Adaptor class
« on: August 09, 2011, 12:09:16 PM »
I've got a cluster of three 3300's (MCD 4.2 SP2 load 10.2.2.10) the newly added network element will not share with other 3300's in the cluster. When checking the logs I receive "Cannot sync with....." and the Alarm source is DEI Storage Adaptor class


Offline wiseguy

  • Sr. Member
  • ****
  • Posts: 202
  • Country: nl
  • Karma: +7/-0
    • View Profile
Re: SDS issue...DEI Storage Adaptor class
« Reply #1 on: August 17, 2011, 11:25:03 AM »
You could try the following. Change on the newly added system the Commend Field within the cluster setup. Change every entry not just his own. Go to one of the existing nodes and check that the change that was made is also changed on that node. If that is the case do a Full Sync from the existing node to the newly added node. You should select the data repair to yes.( MAKE SURE THAT THE SYNC IS DONE FROM EXISTING NODE TOWARDS THE NEWLY NODE)


 

Sitemap 1 2 3 4 5 6 7 8 9 10