Author Topic: UPGrade from 6000MAS to MSL9.1  (Read 2568 times)

Offline ps_tek

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
UPGrade from 6000MAS to MSL9.1
« on: March 14, 2011, 02:11:31 AM »
Hi Im new.
I am installing APC and needs to update to MSL9.1 I have the 9.1 iso image burhed to a cd this connected to the usb of 3300cxi when telnet to the APC and reboot the APC there is a
Press F2 for Setup flicking in the bottom of the putty screen. When I press F2 nothing happens.
It stays this way until it boots on the on installed version.
Am I doing something wrong????


Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: UPGrade from 6000MAS to MSL9.1
« Reply #1 on: March 16, 2011, 05:28:08 PM »
If you reboot the APC and it boots from the normal load, then it could be one of two things:

1 - Your CD drive is not supported
2 - The CD itself has not extracted properly from the iso to disk



 

Sitemap 1 2 3 4 5 6 7 8 9 10