Author Topic: How to tell hard drive type (Read 4296 times)

ralph · « **on:** January 28, 2011, 04:09:07 PM »

Here's a Hmmmm.....

Does anyone know a way to tell remotely what type (or even size) hard drive a system has?

All these news systems are going in with SDS drives and someone in our office finally said "we should document who has what drives".
Ya think?

Now we've got a bunch of system with SDS drives and no way to tell without crack'n the case.

Ralph

Mitel100 · « **Reply #1 on:** January 28, 2011, 04:53:24 PM »

The only command I now is done in the shell, which is ataShow

This will display all the hard drive and RAID information in hex.

Hope this helps

bobcheese · « **Reply #2 on:** January 29, 2011, 04:37:24 PM »

pretty sure that the maint command 'firm panel' shows amongst other things the hard drive type.

Mitel100 · « **Reply #3 on:** January 29, 2011, 05:23:06 PM »

firm panel has been removed as a command

ralph · « **Reply #4 on:** January 31, 2011, 08:02:58 AM »

Thanks for the input.
I checked the Firm Panel command from Telnet - nope.

The ataShow command looks like a good start but I'll have to compare other systems to see what they show.
i.e. SATA, ATA, etc.

Ralph

Mitel Forums - The Unofficial Source

News:

Author Topic: How to tell hard drive type (Read 4296 times)

ralph

How to tell hard drive type

Mitel100

Re: How to tell hard drive type

bobcheese

Re: How to tell hard drive type

Mitel100

Re: How to tell hard drive type

ralph

Re: How to tell hard drive type