Author Topic: 69XX Mass deploy and auto-provision  (Read 104 times)

Offline bojo387

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 261
  • Country: sg
  • Karma: +4/-0
    • View Profile
69XX Mass deploy and auto-provision
« on: Yesterday at 08:58:09 AM »
Hi all,

I'm looking for newer documentation that details the process of mass deploying 69XX sets on MiVB. And, I'm also looking for a way to auto-provision them without tech or users needing to login with the PIN on the phone during deployment.
In KMS, I found an article on Mitel DHCP option 125 but the guide is for Windows 2012 DHCP Server. Is there anything more recent? Can we use DHCP option 66 to point them to the MiVB as the TFTP server? And will they take that as the Call Server address? (I know Mitel states an external FTP is required for more than 200 69XX phone sets).
For auto-provisioning, I'm thinking that we put the MAC addresses in the exported Users CSV then import that to ESM? Is there a better way?

BR/Bojo


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4124
  • Country: us
  • Karma: +136/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: 69XX Mass deploy and auto-provision
« Reply #1 on: Yesterday at 09:01:14 AM »
We always just use DHCP option 43...

Do you have a dedicated voice VLAN? The phones support LLDP-MED auto voice VLAN and you can just run the DHCP server in the Mitel... That is the easiest and recommended way these days.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2247
  • Country: us
  • Karma: +70/-0
    • View Profile
Re: 69XX Mass deploy and auto-provision
« Reply #2 on: Yesterday at 12:23:02 PM »
I think the 2012 setup is still valid, it is a bit hard to actually do IMHO


 

Sitemap 1 2 3 4 5 6 7 8 9 10