Mitel Forums > Mitel MiVoice Business/MCD/3300

Mitel Custom Repository for software upgrade

(1/1)

wobbly_head_bob:
I have a small cluster of about 40 Mitel 3300s all running 9.2.  I've been informed that support is running out, it was a good run, but I've got to upgrade.  All of these controllers (save for one) operate in an offline sync mode....aka, no internet.  So we've set up a laptop, downloaded 10.2, configured IIS (17 times over) and made this our custom software repository.  I can open a browser type in the ip address/swrepo/10.2.0.57 and I can see all the files and directories therein.  So far so good.  From any of those controllers I can PING the repository lap top...excellent!  However, when I add this custom repository to my controller:  "Failed to connect to the repository. Verify that the URL address is correct. You may need to specify a fully qualified domain name in the URL address." in nice red letters of failure.  I've included two screenshots...one of the failure and another of a browser opened.

What are we missing?

Edit:  We have encountered the exact same issue even within the same subnet.  We are not able to see (via wireshark) any http request being sent from a controller to the repository.

ZuluAlpha:
Take out the 10.2.0.57 in the custom repo field and give it a try.

Navigation

[0] Message Index