Author Topic: MBG Error when updating the Blades options  (Read 348 times)

Offline DaveA

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
MBG Error when updating the Blades options
« on: December 11, 2024, 06:40:00 AM »
Hi all, I have recently deployed two MBGs into Azure. The deployments went ok, I licenced both systems, then updated the MSL and downloaded and installed the MBG. But now in Blades I am seeing a 'transport endpoint is not connected' error for both systems. I can still sync with the AMC ok and its not a firewall issue otherwise I wouldn't have been able to download a new MSL or MBG. The error message differs slightly between systems, see one attachment, but they say:

'WARNING:   https://swdlgw.mitel.com/swdlgwapi/rpc connection error: Transport endpoint is not connected'. This one I rebooted and it now seems ok.
'WARNING:   Transport endpoint is not connected'. This one also rebooted but still get this error.

Any ideas?

Thanks



Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 346
  • Karma: +11/-0
    • View Profile
Re: MBG Error when updating the Blades options
« Reply #1 on: December 11, 2024, 08:46:11 AM »
hat sounds like a temporary error trying to access the blades server. The licensing server, AMC (soon to be SLS), is different from where the s/w is located and download from. SWDL (SoftWare DownLoad)

Offline DaveA

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: MBG Error when updating the Blades options
« Reply #2 on: December 11, 2024, 09:05:42 AM »
No I dont believe it is as i have other MBGs that can access swdl absolutely fine, including my second MBG in Azure so to me this is most likely MBG related, somewhere?!?

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1225
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: MBG Error when updating the Blades options
« Reply #3 on: December 11, 2024, 09:56:57 AM »
Check the "messages" log file and see if there's any detail or helpful information there. I've never seen that error before.

Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 346
  • Karma: +11/-0
    • View Profile
Re: MBG Error when updating the Blades options
« Reply #4 on: December 11, 2024, 10:33:05 AM »
run tcpdump to see what the connection is failing at... looks like a network issue to me.

correction, i read the original issue wrong, thought you said the problem resolved after re-booting.


 

Sitemap 1 2 3 4 5 6 7 8 9 10