Mitel Forums > Mitel MiVoice Business/MCD/3300

MiVB and phone 6930 firmware

<< < (2/2)

acejavelin:

--- Quote from: jmoss on February 11, 2025, 10:11:51 AM ---
Mitel noob here. I do not know much about Mitel/MiCollab/MiVoice Business systems.

I am looking for Mitel 6930 MiNet firmware. We purchased a lot of used 6930 phones and are unable to flash with our firmware.

Here's what we we have (copied from the About section):

MiCollab 9.7.0.27-01
Mitel Standard Linux 11.0.103
OVA 9.7.0.27

Release level: 10.0 SP1
Active software load: 10.0.1.18 (21.0.1.47)
Platform: Industry Standard Server


--- End quote ---
Are these SIP or MiNET devices currently.

For MiNET, you don't normally flash your own firmware... if you point them at your controller it should automatically flash. Factory reset the device and reconnect it to a network that has proper DHCP options setup and the phone should flash on it's own.

For SIP devices, the firmware in on your system in the /sysro/tftp folder and if you just do a TFTP upgrade and point it to your controller and use the correct file name, it should just work.

jmoss:
The devices were previously SIP and we operate on MiNET.
My co-worker was able to get a copy of the MiNET firmware from the previous owners of the devices.
(unfortunately the file is too large for me to attach here)

Navigation

[0] Message Index

[*] Previous page