Author Topic: After changing server-manager password in EX controller, E1T1card dose not show  (Read 276 times)

Offline Ksagar

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Hi,

This is new installation.

We are configuring E1 PRI card. But EIT1 card / Auto Config button is not highlighted in Gateway Trunk Descriptor after changing the server-manager password.

Also getting error message "Error getting form data,see logs for details" in gateway configuration scripts form.

We have followed the below steps :-

1) Upgrade EX deployment tool to latest version.
2) Load and configure the MiVb image.
3) login server-manager 1st to sync license.

We observed that E1T1 card shows before changing password from server-manager.

On 1st server-manager login, password change page appears and if we change the password then E1T1 issue occur.

Currently EX is loaded with base licenses and we are testing the users and PRI on demo license.

Kindly suggest.


Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
check :

Hardware Module in the Mivb and also :

Trunks -> Entreprise Gateway -> Gateway trunk Descriptors


 

Sitemap 1 2 3 4 5 6 7 8 9 10