Mitel Forums > Mitel MiVoice Business/MCD/3300

NICs for Teleworker

(1/1)

gomaze:
I am trying to do one of two different things.

1. Find out how to embed drivers for a NIC into the Teleworker OS.

-or-

2. Find a list of compatible NIC chip sets that work with Teleworker.

ralph:
Gomaze,
I looked on MOL for a Hardware Compat List and could only find info on compatible servers.

Take a look here: http://wiki.contribs.org/SME_Server:Documentation:FAQ#Hardware_Compatibility_List
Bear in mind that Mitel Standard Linux started out from a project called the SME server.   You can the website www.contribs.org now takes you to the WIKI site.   

This software is still maintained outside of Mitel.  There are a lot of add ons that can be put on the server.  YOu don't need a Mitel license to run it.  Worth checking out.  On the WIKI site there is a forum where you can get some help installing drivers.  Just remember that when you step outside of Mitel's supported environment, you may have trouble getting support.

Ralph

Mattmayn:
MSL is built off of CentOS 4.x. Find an RPM that supports the NIC chipset you want and install it. Or, build the desired drivers from source.

Navigation

[0] Message Index