Author Topic: PRI configuration on MiVB  (Read 1315 times)

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
PRI configuration on MiVB
« on: June 27, 2024, 03:27:10 PM »
So I have done a lot (well actually just enough) PRI stuff on MiVO 250 but we are now doing MiVB systems.  We almost exclusively use SIP trunks but I have a client that insist on keeping their PRI.   I have never had to set one up in MiVB and I have been going to any documents I find on MiAccess but am not having any luck find a good guide for this.  Can anyone piont me in the right direction for a good step by step for configuring a T1/PRI form scratch on Business?

I am willing to hire out some assistance if anyone is interested in some tutoring.  :-)


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: PRI configuration on MiVB
« Reply #1 on: June 27, 2024, 05:45:34 PM »
Help file should give you all that is needed

Offline ACDeezNutz

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +2/-0
    • View Profile
Re: PRI configuration on MiVB
« Reply #2 on: June 28, 2024, 11:50:13 PM »
The MiVB certification manual has a whole chapter on it with step by step instructions.

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
Re: PRI configuration on MiVB
« Reply #3 on: July 01, 2024, 11:33:03 AM »
The MiVB certification manual has a whole chapter on it with step by step instructions.

Thanks, this was very helpful.  It has been so long since I did the training class and we pretty much skipped over this section. 


 

Sitemap 1 2 3 4 5 6 7 8 9 10