Author Topic: How to send a Positive Disconnect signal from IP phone to an AG phone line?  (Read 1727 times)

Offline loun80

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
I have a device connected to an AG phone line.  When the device calls an IP phone, is answered by the IP phone and the IP phone hangs up, the device remains on line.

How can I set up the IP phone to send a positive disconnect signal?


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4098
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
What is an "AG phone line" and how does it connect to the system? An analog device or something? You are looking at the wrong end, you need to get the end "closest" to that device to disconnect properly... if it's an ATA of some kind, that is a setting in the ATA, if it's a CO or ONS port on a Mitel controller, that is set in the device profile.

« Last Edit: June 06, 2024, 05:36:32 PM by acejavelin »

Offline loun80

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
The AG is the analog gateway.  So the device is connected to a port is connected to the analog gateway.

Where do I go to look at the ATA, CO etc. settings?

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
If it is an ons port, the circuit descriptor would be changed to do positive disconnect

Offline loun80

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
What if it's an IP phone?

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1213
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
You'd have to look at the settings in the analog gateway, or refer to the documentation on it.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4098
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
What if it's an IP phone?
Meaning it's a FXS gateway like an Grandstream or AudioCodes? You would have to web into the unit and enable the Positive Disconnect and adjust the timer appropriately.


 

Sitemap 1 2 3 4 5 6 7 8 9 10