Author Topic: MiVB MAC on SMB  (Read 1272 times)

Offline BoiseBorn

  • Jr. Member
  • **
  • Posts: 32
  • Country: us
  • Karma: +2/-0
    • View Profile
MiVB MAC on SMB
« on: June 06, 2024, 11:37:13 AM »
Hello,
We installed a new SMB running MiVB (10.0.2.10) today and ran into an issue where the virtual MAC of the MiVB changed when powering it on in it's new location. We had built and programmed the system in a lab environment and then powered it down and moved it to a retail location and powered it back on. Since we use network access control to define VLAN assignment per MAC this caused the MiVB side of the SMB to not come up until we found the new MAC and added it to our endpoint DB. Anyone know of a way to have the MiVB keep the same MAC address once configured?


Offline BoiseBorn

  • Jr. Member
  • **
  • Posts: 32
  • Country: us
  • Karma: +2/-0
    • View Profile
Re: MiVB MAC on SMB
« Reply #1 on: June 24, 2024, 11:09:42 AM »
I ended up finding the answer to my own question. An IP address change of the MiVB will initiate a change in the virtual MAC.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: MiVB MAC on SMB
« Reply #2 on: June 24, 2024, 07:35:42 PM »
Thanks for the update on that.

Good to know.


 

Sitemap 1 2 3 4 5 6 7 8 9 10