Author Topic: MITEL 5634 WIFI HANDSET - TELEWORKER Configuration  (Read 1220 times)

Offline astempien

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
MITEL 5634 WIFI HANDSET - TELEWORKER Configuration
« on: April 12, 2024, 01:33:37 PM »
Apologies to start, as my technical expertise with these system is very limited. I was given some of these 5634 Handsets to configure. Internally, I was able to get them setup without issue. Where I am having a problem is setting them up an an external network. I am configuring it with an External Network for testing (Network A in PDM) and am able to get a connection. But on the handset I just get "No Access". Attaching some photos as to where I am so far.
1. WinPDM SIP settings
2.User and Settings Page detail
3. MGB, SIP, MiNET, Telework pages


Offline astempien

  • New Member
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: MITEL 5634 WIFI HANDSET - TELEWORKER Configuration
« Reply #1 on: April 12, 2024, 01:35:29 PM »
additional screen shots

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: MITEL 5634 WIFI HANDSET - TELEWORKER Configuration
« Reply #2 on: April 12, 2024, 02:34:32 PM »
FWIW, when you crete this, the sip password s an internal value. When adding teleworker, it creates this such that there is a different external name and a complex unknown password.

You can modify the sip teleworker external name and password so that it is the same. If so, I would make sure the internal is not simple.

You have to get into the MBG to make the changeses.


 

Sitemap 1 2 3 4 5 6 7 8 9 10