Mitel Forums > SIP On Mitel
DTMF not correctly sent from SIP extension
(1/1)
mem94043:
I have a SIP door phone set up on a MiVo250. Users can call from any Mitel IP phone extension to the door phone (SIP ext) and when it answers they dial the 'relay' code (built-in to door phone) and it triggers just fine. However, if the door phone initiates a call to another Mitel IP extension and it answers, the door phone does not recognize any touch tones entered by the user on the IP phone. So, I essentially have one-way DTMF working. Any thoughts on what is causing this?? Thx!
acejavelin:
Make sure your DTMF payload type (96 or 101 usually) is set the same in the SIP Peer Profile as it is in the device.
Navigation
[0] Message Index
Go to full version