Mitel Forums > SIP On Mitel
Engenius Durafon SIP, SIP capabilities in Mivoice Business V8
(1/1)
Domrac45:
here's my current configurations:
Call Routing and Administration Options
Outbound Proxy Server
Replace System based with Device based In-Call Features Yes
Allow MWI Notifications without Subscription No
Enable Digit Collection In Busy Or Alerting State No
Allow Device To Use Multiple Active M-Lines Yes
Allow Using UPDATE For Early Media Renegotiation Yes
AVP Only Device Yes
Enable Mitel Proprietary SDP Yes
Force sending SDP in initial Invite message No
Ignore SDP Answers in Provisional Responses No
Limit to one Offer/Answer per INVITE No
Prevent SDP Renegotiation If Peer Initiated Hold Yes
Prevent the Use of IP Address 0.0.0.0 in SDP Messages Yes
Renegotiate SDP To Enforce Symmetric Codec No
Repeat SDP Answer If Duplicate Offer Is Received No
Send Answer only after renegotiation is complete No
Suppress Use of SDP Inactive Media Streams No
Allow Display Update Yes
Disable Reliable Provisional Responses No
Disable Use of User-Agent and Server Headers No
Fail REFER To Keep Call Active On Mid-Call Feature No
If TLS use 'sips:' Scheme No
Multilingual Name Display No
Override Auto-Answer Headers No
Override Auto-Answer Headers With
Remove Anonymous User No
Require Reliable Provisional Responses on Outgoing Calls No
Suppress Redirection Headers No
Use P-Asserted Identity Header Yes
Use user=phone No
Registration Period Minimum 300
Session Timer 90
Session Timer: Local as Refresher No
Subscription Period 3600
Subscription Period Minimum 300
Subscription Period Refresh (%) 80
Invite Ringing Response Timer 4
On the SIP module, I'v got green light, I Ping my PBX, able to make and receive calls for couple of minutes and it stops working. There's something somewhere been trying to figure it out for days...
lundah:
Check the timers in the SIP Device Capabilities versus what's set in the endpoint itself. If it works for <5 minutes, check the Registration Timer and make sure it matches on both sides, that's the most likely culprit. If that still doesn't work, take a packet capture and look for any interesting SDP packets when it stops working.
Domrac45:
Ohhhhhh makes so much sense, I had unmatching number for the timers. I corrected it remotly, can wait for tomorrow morning.
Navigation
[0] Message Index
Go to full version