« previous next »
Pages: [1]   Go Down

Author Topic: tcpump command not found  (Read 1566 times)

Offline MiSam

  • Jr. Member
  • **
  • Posts: 31
  • Country: ca
  • Karma: +0/-0
    • View Profile
tcpump command not found
« on: January 25, 2022, 12:10:29 PM »
Hi All

I have Mivoice Business release 9.1.0.92, When I try to login through butty to shell and run tcpdump for traffic monitor I got tcpdumo command not found.
Can someone help me to active the tcpdump to the shell?

Regards,
Logged

Offline ACDeezNutz

  • Jr. Member
  • **
  • Posts: 43
  • Karma: +2/-0
    • View Profile
Re: tcpump command not found
« Reply #1 on: April 15, 2022, 11:42:53 PM »
You run the command "sip tcpdump on" from the maintenance commands in the GUI and then use WinSCP to get into the vmail folder of the 3300 to get the PCAP is the way I've always done it.
Logged

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1405
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: tcpump command not found
« Reply #2 on: April 17, 2022, 02:28:28 AM »
I am assuming a physical controller. This is a known issue.

If you have access to KMS look at  SO5184.

The solution is to download the tcpdump package from Mitel KMS and install it or upgrade to at least 9.1.0.94 as it was fixed in that release.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10