Mitel Forums > Mitel MiVoice Business/MCD/3300

Echo on 5340

<< < (2/2)

Mattmayn:
I'll see if I can get AT&T to play fair then. Thanks.

v2win:
Possible speed/duplex mismatch issue on the network?

ralph:
I suppose it is possible.   More likely you'd get clipping though.   But good point.  Be sure all ports are set to "Auto Negotiate" or "100/Full".  Both phones and switch ports.   If you set a port to 100/full and the phone stays at "auto neg" it will actually auto neg to 10/half.   Not good.  You get lots of collisions.

Ralph

Navigation

[0] Message Index

[*] Previous page